Finally – Version 2.15 (final!)

  • This version officially supports Windows 10 and Windows 11.
  • Also confirmed to work with Windows 7 and Windows 8, with some minor GUI visual artefacts, though.
  • Report bugs to!

Changes since version 2.15 (Beta 3):

  • Workaround for Oculus VAD.
  • Fix crash with Blackmagic Design DeckLink driver.
  • Avoid using “Stereo Mix” input in default configuration.
  • Fix erratic behaviour of “Force 16 bit” – option, especially when WDM driver does not support a 16 bit sample data format.







57 responses to “Finally – Version 2.15 (final!)”

  1. Michael Brito Avatar
    Michael Brito

    No Asio Driver, only a driver updater??? Hawk tui!!!

  2. stressed Avatar

    Can anyone help? just downloaded asio4all for Ableton live 12 on my laptop and I’ve managed to get the latency down but the sound is stuck to only my laptop. Will get no sound through my headphones that’s plugged into the audio jack. I also can’t adjust the volume level that manages to come out of the laptop. Is this normal?

  3. I can only download ASIO4ALL web site which will open
    Why does this happen and how can I download ASIO?

    Thank you

    1. Tribilin Avatar

      Pudiste solucionar el problema?

      1. Saskia Avatar

        Tengo el mismo problema al intentar instalar, alguien sabe ¿dónde puedo arreglar esto?

  4. Mi tarjeta de audio externa es una (mierda) DGÑOGA. ASIO4ALL en el DAW REAPER no me reconoce el micrófono.

  5. Asio4All ist voller Überraschungen. Ich habe einen Soundblaster GC7, der laut Hersteller Creative kein ASIO unterstützt. Deshalb bei Creative nachgeschaut und einen Soundblaster G6 bestellt. Damit konnte ich dann das Wavelab 11.2 bequem starten und es läuft. Dann aus Neugier den Asio4All installiert und die GC7 wieder mit angestöpselt. Und siehe da, nach einigen Einstellungen am Puffer funzt nun die GC7 ganz wie gewohnt, obwohl die kein ASIO unterstützt. Weiß da wer eine Antwort zum Thema?

  6. i use a NI traktor kontrol S8, it`s a controller with soundcard built in, and i use it with Traktor 3 software…it seems it is using asio drivers but my output sound is crackling and glitching even if i increase the buffer size to the max…i just bought a powerful 2023 laptop from Lenovo Legion, 13-th gen intel i7-13700H CPU…5gb freq..16gb RAM…windows 11….cmoooon, wtf should i do??? nothing works…i need to work with it but cannot, because it has crackling sound….help 🙁

    1. 1. install proper “Traktor Kontrol S8” driver from:
      2. then try update firmware: Device Updater for Traktor Kontrol S8
      3. then in traktor (be sure you have recent version installed): “Traktor Kontrol S8 (ASIO)” driver – no asio4all…
      (my working settings are: 256 samples process buffer + 3 ms usb buffer)
      4. if you are experiencing problems, write on native-instruments support or their forums – they are willing to help.
      * if you wish to use asio capabilities of Kontrol S8 via Asio4All it might work, but it will never surpass NI driver.

    2. joeyshah Avatar

      Did you get a fix around for this. I seem to be facing the same problem

  7. Carlos Lopez Avatar
    Carlos Lopez

    Cada vez que hacen una “mejora” , lo entreveran y malogran mas

  8. why7 is mine downloading a website shortcut?

    1. same here lol

      1. G doggy dog Avatar
        G doggy dog

        any fix for this? same issue!

  9. Adrian Wiik Avatar
    Adrian Wiik

    When trying to update ASIO4ALL to version 2.15 using winget, I get the following output:

    PS C:\Path\To\user> winget update MichaelTippach.ASIO4ALL
    Found ASIO4ALL [MichaelTippach.ASIO4ALL] Version 2.15
    This application is licensed to you by its owner.
    Microsoft is not responsible for, nor does it grant any licenses to, third-party packages.
    299 KB
    Installer hash does not match.

    Please check if your installer in the winget repository has been compromised, or recalculate and fix your installer hash.

    1. If you follow the original link, it ends up in an redirect – that’s why.
      Looks like winget uses Deep Linking. Which is highly controversial, mildly put.

  10. Does not support 48K in Pro Tools

  11. [Windows 10 + Ableton Live 11 Lite + latest ASIO4ALL_2_15_English.exe, sound via standard line out on Dell laptop]
    2-3 months ago the Windows volume settings on the headphones channel made no effect. The volume only control was in Ableton. Sound quality was OK. Recently, I hear noise and quality is much worse. I also realized that Windows standard volume control makes different. Reinstalling the Asio driver does not help. Have I accidently turned a different mode on driver or on Windows? Or there was some change in standard Windows patches last months that changed that behavior?
    Any hints appreciated.

  12. Islam Elgarem Avatar
    Islam Elgarem

    I use asio4all with pro tools, and since then, every single time I open Pro tools I can’t get a sound with anything else (the browser, Spotify, internal media player, etc.) What shall I do?

  13. vikentij Avatar

    уж больно всё у вас замудрённо.

    1. Zoran Barbaric Avatar
      Zoran Barbaric

      slazem se 100%

  14. Ciao, usando ASIO4ALL 2.15 in Windows 11 in un PC HP recente, quando apro REAPER come DAW succede che l’audio non commuta dagli speacker alle cuffie quando le inserisco.
    Questo succede SOLO con Reaper che sta usando ASIO4ALL, mentre in tutte le altre applicazioni il problema non sussiste…
    Avete un’idea di come risolvere la cosa ? Grazie.

  15. Lebogang Radebe Avatar
    Lebogang Radebe

    Hi there I downloaded asio 2.15 and I see theres no offline version. Not only that I also see that everytime I pick the asio4all driver in pro tools, it crashes the pro tools session and not only pro tools but also my other daws like ableton and native instrument maschine.

    1. Joseph Narai Avatar
      Joseph Narai

      I have the same issue.

    2. Download 2.14 with offline settings, then move 2.15’s files into the same pathway. Note: You cant use 2.15’s setup into the same pathway. You have to copy and paste them.


    why this version have no offline settings? I NEED OFFLINE SETTINGS.

  17. parisiene walkaways Avatar
    parisiene walkaways

    ASIO4ALL has always been an outstanding piece of software – but the new website layout and site functionality is a total opposite.

  18. Works like a charm on my laptop. 12 ms latency with realtek HD audio.
    You made a wonderful job Michael, and moreover it’s free.
    I just can not understand negative commentaries. The driver will not work on a crappy computer peridd.

  19. pavendax Avatar

    I updated my asio4all driver but it perform worse than the previous version that came preinstalled with my FL Studio 20.0.3
    Sometime it crackles even my cpu load is low and the ammount of underruns is 0. Delays is the most common problem I experienced after updating to this version, it happens when I just turn off an FX that require lookahead. When I turn off that FX it doesnt come back to 5ms delay, it still delayed like the FX is still using the lookahead thing.
    If it possible. I want to come back to the previous version that works fine, which is the one that comes with the early FL Studio 20 at 2018, but I can’t find the version it was.

    1. Right? Same here 😮
      They need to fix this! :c

  20. I used the ASIO4ALL_2_15_English.exe meant for Windows 10 x64.
    I was running it on a Lenovo M93p Tiny PC with i5, and running the latest Realtek drivers v6.0.1.8186 (2.82) for ALC283 Windows 10 64bit.
    Also have Direct X v11 installed.
    I was also using Renoise 3.2.1 x64 music DAW.
    When it was enabled in Renoise, it slowed down everything to a crawl.
    I reverted to using the WDM driver instead for now.

  21. asio driver work properly but not working other audios (ex) youtube, VLC,

  22. I use window11, my asio4all in pro tools or audition, either of it have sound, also in pro tools, it doesnt support 48kHz

  23. Hey team,

    I’m downloading this driver as it is recommended by Vochlea to use their Dubler 2 mic and software. I am running the latest version of Windows 11 Pro. Previous download caused brand new laptop to restart without command several times and needing to be reset. Trying to avoid the same issue happening again. Is this the right call? Cheers guys.

    1. Since ASIO4ALL does not come with Kernel Mode components, it cannot be the root cause of that kind of system crash.
      Troubleshooting BSOD errors 🔗

  24. Dimitris Avatar

    I have a Presonus Studio 24c as input for my guitar and Realtek S1220A onboard sound card as my output.

    My problem is that everything works FINE until 20-30 minutes that the sound starts to lag/delay. (NO cracklings noises etc… just lag/delay)

    Tried Buffers from 64-1024 but nothing. Also tried to play with Latency Compensation and Buffer Offsets on both input/output devices……No luck.

    On my input I have Hardware Buffer ON because without this after 20 minutes the sound starts to cracking.

    My input and output has the same : 48KHz / 24bits

    My system has an i7-12700K and 32GB DDR5 RAM.

    Is there anything I can do?

  25. Timi Nero Avatar
    Timi Nero

    I get an error message saying “error opening file for writing” whenever I try to install the driver. What do I do

    1. Close any application currently using ASIO4ALL. The installer cannot overwrite files while ASIO4ALL is still running.

    2. Very annoying website. Adverts at bottom take up 25% of the screen. Other adverts appearing all over the screen.
      Hard to navigate and differentiate between proper content and adverts.

  26. Gavin Sickler Avatar
    Gavin Sickler

    Hello, I have a Wrugste and it’s not registering at all. The manual instructed me to come to this website and install the drivers here. But when I install it doesn’t give me any options just installs and gives me a link to this website, I’ve seen videos but I don’t get shown any boxes to check off no matter how many times I try to re install

  27. Amir M Moon Avatar
    Amir M Moon

    How do I send in my crash report

    1. Enable user mode dumps, reproduce the crash event – and then send in the (mini)dump file, along with some prose.
      Collecting User-Mode Dumps 🔗

  28. ASIO4ALL makes my DAW (Ableton Live) crash every single time I try to activate it as a driver. Do not recommend.

    1. Send in the crash dump and we shall look into it.

    2. Amir M Moon Avatar
      Amir M Moon

      I am having the same issue

  29. никита Avatar

    после загрузки появляется просто ссылка на сайт, что делать?

    1. “Что делать?” В отличие от Ленина, нам не нужно писать целую книгу, чтобы ответить на этот вопрос.
      Руководство по эксплуатации!

      1. joefenske Avatar


  30. Andrew Liu Avatar
    Andrew Liu

    After I download it, I click on the icon it just leads me to this web site. I need help. Thank you

    1. Same problem here. Nothing in the file folder either, except a shortcut linking to this site and a couple of Dlls with no readme or instructions.

      1. Same problem = same solution.
        Navigating this site’s “Help” menu will bring you here:

    2. Vuyolwethu Maseti Avatar
      Vuyolwethu Maseti

      I have been trying to use it on Sibelius software, It is not working. It does appear but there is no sound at all. I also need help on this one.

      1. I’ve got it working, but only on 32-bit Sibelius 7 (in Windows 11). 64-bit is silent. Not sure why, yet.

  31. Raffaele Avatar

    I don’t know about others, but I found the offline configuration utility useful which has disappeared as an option in this version. Anyway thanks for these drivers!

    1. Adrian Gadziomski Avatar
      Adrian Gadziomski

      You can obtain the offline version of ASIO 2.15. First, you need to install the older version, ASIO 2.14. Then, extract the newer version, 2.15 – final. Add ‘asio4all.dll’ and ‘asio4all64.dll’ from the extracted ASIO 2.15 to the installed folder of 2.14, and run ‘A4ARegFix.exe’.

  32. ( I found the cause of the popping sound )

    Hi, I represent everyone who uses asio4all, giving feedback on the popping sound and tips on how to fix it.
    Before I get into the problem, I would like to tell you about the computer configuration I use, which is very powerful, but still has a state of popping sound when singing live in the paltalk chat program. Laptop MSI GE62 6QF PRO. i7, Ram 16G.

    I use cubase software in combination with asio4all to sing live on paltalk chat software.but have a popping sound..
    how to fix, i open asio4all, and drag the buffer Size to 768, then I close the asio4all window. and play music, the phenomenon of popping sound is still there. then I open the asio4all window and drag the Buffer Size to 640 and close the window. I no longer have the popping sound problem>
    you try to find the error to fix it, and release the latest update. thanks you

  33. ivan robles Avatar
    ivan robles

    what a crap website with adds. makes me not want to try. it used to be easier to download. it sucks now

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

  • Allow Pull Mode (WaveRT)

    Allow Pull Mode (WaveRT)

    Note: These controls have no effect for WaveRT packet devices. Packet devices do not support polling – and always will use event mode. Therefore, the entire “Options” section may be hidden for packet devices. This is not a bug! There are two basic access methods for a WaveRT device, “pull-mode” (also called “event-mode”) and “push-mode”… more

  • Always Resample 44.1<->48 kHz

    Always Resample 44.1<->48 kHz

    ASIO4ALL can do real time resampling of 44.1 kHz audio to/from 48 kHz. Resampling will automatically take place whenever ASIO4ALL is opened for 44.1 kHz and the WDM driver does not support this sample rate. There may, however, be instances in which case an audio device will support 44.1 kHz only by resampling internally. More… more

  • Force WDM driver to 16 Bit

    Force WDM driver to 16 Bit

    This option only has an effect if the supported bit depth of the WDM driver is larger than 16, but less than 24. Some devices report e.g. 20 Bits resolution but cannot actually be opened for more than 16 Bits resolution. Should this be the case on your system, this option provides a workaround. Originally,… more

  • Common usage cases optimizations

    Common usage cases optimizations

    Becaue it all depends… more

  • Troubleshooting


    More potential problems and possible solutions: more