Private API v2.0

07.02.21

Table of Contents

Introduction

The ASIO4ALL driver provides a standard ASIO interface to the host application by means of which the host can control certain aspects of driver behaviour. Other aspects, such as the WDM device configuration, are not covered by the means of control achievable through a standard ASIO interface. With the requirement for more control in mind – including the option for the OEM to provide their own replacement for the original ASIO4ALL GUI – a proprietary interface to the ASIO4ALL core engine was created.

The scope of this interface definition applies to all 2.x versions of the freely available ASIO4ALL software starting with version 2.9, as well as to custom builds for which support for this interface had been specified.

Accessing the interface

Since ASIO under Windows is accessed as a COM in-process server object, the obvious design choice was to use the same type of mechanism for the proprietary interface as well.

A self registering driver DLL supporting the ASIO4ALL private interface will register the latter along with the standard ASIO interface in its DLLRegisterServer routine. Application developers can query any existing IASIO for an IA4APRIVATE and, once discovered, use the functionality provided.

Consequently, creating an instance of the ASIO4ALL private interface is as easy as:

CoCreateInstance(IID_IASIO,0,1,IID_IA4APRIVATE, (LPVOID*) &ifcInstance);

  • see the constructor code of the a4aInterface.cpp wrapper class!

The interface CLSID (in CLSID.cpp) is {A26078C5-2840-4726-B427-E60FC8FEE403}.

The actual definition of the interface as well as all associated declarations are contained in COMMON\iaa4aprv.h

Interface member functions

DWORD iA4APrivateGetVersion()

This function may be called at any time and returns the version of the private interface in the BCD coded form 0xMMMMmmmm, where MMMM is the major and mmmm the minor revision number. Revision 1.23 would be encoded as 0x00010023.

void iA4APrivateEnumerate()

Calling this function will cause the driver to re-run audio device enumeration. It is only safe to call this whenever the driver is in the idle state (“initialized” as per the ASIO specification). This function is normally used after a callback has been installed, since the callback would be invoked immediately after enumeration, allowing the application to take over control of WDM device configuration.

void iA4APrivateEnumSetCallback(BOOL (void *), void * pCbData)

Installs a callback the driver will invoke immediately after audio device enumeration. The pCbData argument is a pointer to arbitrary data and will be passed to the callback function. Normally, this would point to instance data etc. The callback is invoked always after the driver has finished its internal WDM device (re-)enumeration.  Use iA4APrivateEnumerate() in order for the driver to immediately re-run enumeration!

If the callback function returns TRUE, the driver will re-run enumeration yet once more. Thus, you normally would want to return FALSE, in order to avoid endless looping!

Only in the context of the callback function it is safe to access audio device / interface / pin properties! Access to these properties outside of the callback can lead to unpredictable results!

A4AError iA4APrivateGetDeviceProperty (A4ADeviceProperty DeviceProperty, long DeviceIndex, void *PropertyData, long DataSize)

Reads the property DeviceProperty of enumerated audio device DeviceIndex into user supplied storage PropertyData of size DataSize.

Can only safely be used in the context of an enumeration callback!

A4AError iA4APrivateSetDeviceProperty (A4ADeviceProperty DeviceProperty, long DeviceIndex, void *PropertyData, long DataSize)

Writes the property DeviceProperty of enumerated audio device DeviceIndex from user supplied storage PropertyData of size DataSize.

Can only safely be used in the context of an enumeration callback!

DevicePropertycan be either of the following:

kA4A_Device_dwFlags [DataSize=4]

This is a bit field with the following bit definitions:

A4A_FLAG_HWBUFFEREnable hardware buffer access method.
A4A_FLAG_FORCESRCEnforce 44.1<-> 48kHz resampling
A4A_FLAG_PULLMODEAllow “Pull” mode for WaveRT devices, if supported.
A4A_FLAG_FORCE16Limit WDM interface bit depth to 16
A4A_FLAG_RUNNINGIndicates object is in the “running” state.
A4A_FLAG_ERRORUnspecified error indicator.
A4A_FLAG_ENABLEDEnabled in current configuration.

kA4A_Device_lpszName  [DataSize=sizeof(void*)]

Pointer to device name string (as obtained from registry)

kA4A_Device_lpszVendorName [DataSize=sizeof(void*)]

Pointer to vendor name string (as obtained from registry)

kA4A_Device_lpszServiceName [DataSize=sizeof(void*)]

Pointer to service name string (as obtained from registry)

kA4A_Device_lpszLocationInfo [DataSize=sizeof(void*)]

Pointer to location information string (as obtained from registry)

kA4A_Device_lpszDeviceID [DataSize=sizeof(void*)]

Pointer to PnP ID string (as obtained from registry)

kA4A_Device_dwBusNumber [DataSize=4]

Bus number (as obtained from registry). Actually a 3 char string with trailing 0.

kA4A_Device_dwKsBuffers [DataSize=4]

Number of Kernel buffers to use.

kA4A_Device_dwIoDelay [DataSize=4]

Delay offset in h/w buffer (ms).

kA4A_Device_dwInputComp [DataSize=4]

Input latency compensation (samples)

kA4A_Device_dwOutputComp [DataSize=4]

Output latency compensation (samples)

kA4A_Device_dwBufferSize [DataSize=4]

ASIO buffer size (samples) for this device.

A4AError iA4APrivateGetInterfaceProperty (A4AInterfaceProperty InterfaceProperty, long DeviceIndex, long InterfaceIndex, void *PropertyData, long DataSize)

Reads the property InterfaceProperty of enumerated device interface InterfaceIndex on enumerated audio device DeviceIndex into user supplied storage PropertyData of size DataSize.

Can only safely be used in the context of an enumeration callback!

A4AError iA4APrivateSetInterfaceProperty(A4AInterfaceProperty InterfaceProperty, long DeviceIndex, long InterfaceIndex, void *PropertyData, long DataSize)

Writes the property InterfaceProperty of enumerated device interface InterfaceIndex on enumerated audio device DeviceIndex from user supplied storage PropertyData of size DataSize.

Can only safely be used in the context of an enumeration callback!

InterfacePropertycan be either of the following:

kA4A_Interface_dwFlags [DataSize=4]

This is a bit field with the following bit definitions:

A4A_FLAG_RTAUDIOIndicates interface is WaveRT.
A4A_FLAG_RUNNINGIndicates object is in the “running” state.
A4A_FLAG_ERRORUnspecified error indicator.
A4A_FLAG_ENABLEDEnabled in current configuration.

kA4A_Interface_lpszName [DataSize=sizeof(void*)]

Interface name string as obtained from registry.

kA4A_Interface_pSPDIDD [DataSize=sizeof(void*)]

Pointer to the SP_DEVICE_INTERFACE_DETAIL_DATA structure for this device interface, see Windows DDK for structure definition!

kA4A_Interface_dwProperties [DataSize=4]

Physical characteristics of the device interface. Can be either of the following:

  • A4A_IFPROPERTY_ADC
  • A4A_IFPROPERTY_DAC
  • A4A_IFPROPERTY_SPDIF

A4AError iA4APrivateGetPinProperty (A4APinProperty PinProperty, long DeviceIndex, long InterfaceIndex, long PinIndex, void *PropertyData, long DataSize)

Reads the property PinProperty of audio pin PinIndex on enumerated device interface InterfaceIndex on enumerated audio device DeviceIndex into user supplied storage PropertyData of size DataSize.

Can only safely be used in the context of an enumeration callback!

A4AError iA4APrivateSetPinProperty (A4APinProperty PinProperty, long DeviceIndex, long InterfaceIndex, long PinIndex, void *PropertyData, long DataSize)

Writes the property PinProperty of audio pin PinIndex on enumerated device interface InterfaceIndex on enumerated audio device DeviceIndex from user supplied storage PropertyData of size DataSize.

Can only safely be used in the context of an enumeration callback!

PinPropertycan be either of the following:

kA4A_Pin_dwFlags [DataSize=4]

This is a bit field with the following bit definitions:

A4A_FLAG_AVAILABLEAt least one possible instance remaining.
A4A_FLAG_RUNNINGIndicates object is in the “running” state.
A4A_FLAG_ERRORUnspecified error indicator.
A4A_FLAG_ENABLEDEnabled in current configuration.

kA4A_Pin_dwDataFlow [DataSize=4]

Possible values:

  • KSPIN_DATAFLOW_IN (for “output pin”)
  • KSPIN_DATAFLOW_OUT (for “input pin”)

 – see the Windows DDK for definitions!

kA4A_Pin_dwMaxChannels [DataSize=4]

Maximum PCM channels.

kA4A_Pin_dwMaxBits [DataSize=4]

Maximum audio bit depth.

kA4A_Pin_dwMinSR [DataSize=4]

Minimum sample frequency (Hz).

kA4A_Pin_dwMaxSR [DataSize=4]

Maximum sample frequency (Hz).

Error codes

Functions that return the A4AError type will return either of the following:

A4A_PRIVATE_NOERROR

The operation completed successfully.

A4A_PRIVATE_ERR_ENUM_REENTRY

An attempt was made to re-enter device enumeration while device enumeration is already in progress. The most likely reason is a callback installed using iA4APrivateEnumSetCallback() attempting to invoke iA4APrivateEnumerate(). iA4APrivateEnumerate() must never be used inside the callback!

A4A_PRIVATE_ERR_DRIVER_NOT_IDLE

An attempt was made to access enumeration data while the ASIO driver is not in the idle state. Stop all audio processing and only then call iA4APrivateEnumerate()!

A4A_PRIVATE_ERR_NO_SUCH_OBJECT

The object (device, interface, pin) with the index provided does not exist. You may legally encounter this error when enumerating objects. If this code is returned inside an enumeration loop, this would be an indicator that the end of the device / interface / pin list has been reached.

A4A_PRIVATE_ERR_ILLEGAL_ARGUMENT

An argument has been passed to the interface outside of what it can handle. Possible causes include out of range property identifiers, NULL pointer to property data or a data size argument too small for the property requested.

 Sample application

An MSVC++ sample application project is provided that demonstrates the use of the API described in this document for the purpose of managing WDM device configuration from within the context of your application.

References

  1. ASIO SDK, Steinberg Media Technologies GmbH
  2. Windows Driver Kit, Microsoft, Corp.
  3. Win32 Software Development Kit, Microsoft, Corp.
  4. ASIO4ALL Instruction Manual, Michael Tippach

Copyright © 2003-2021, Michael Tippach

Unless where agreed otherwise, no warranty is given with respect to the accuracy of the information provided in this document and with respect to future changes of interfaces and definitions described herein.

All trademarks used herein are the fully acknowledged property of their respective owners  and used for product identification purposes only.

ASIO is a trademark of Steinberg Media Technologies GmbH.  All other trademarks are the property of their respective owners, used for product identification purposes only.

  • Load default settings

    Load default settings

    Pressing this button will reset all configuration options to their initial defaults. Use when audio initially worked and you later got lost in the configuration process. Also, if you updated your ASIO4ALL to a new version, this option will load the settings recommended by the new version.

    more

  • Switch to advanced mode

    Switch to advanced mode

    Switches the control panel into “advanced” mode, where you can fix things or completely mess them up at your disposal. “Advanced” mode is explained in the “Advanced Configuration” section of this document.

    more

  • Advanced configuration

    Advanced configuration

    Once the control panel has been switched to advanced mode, things begin to look a little more complicated. The device list is now expandable and you can enable more than one item at a time. The device list contains Devices, Device Interfaces and so called “Pins”. Devices are independent hardware units most of the time.…

    more