The ASIO4ALL installer uses the Nullsoft Scriptable Install System. I hereby thank the authors for making this available for free!

I’d also like to say “Thank You!” to everyone for the tremendous amount of feedback that I received. I’d like to especially thank all those putting up with all the “Test Version” stuff I sent out in order to get things working at the expense of your patience!

Also a big THANKS! to all those who are just letting me know how well it works for them and a big SORRY for not always having the time to reply!

  • A complete French localization has been provided by Guillaume Fallet.
  • Gianfranco Minischetti performed the Italian localization work.
  • The Russian localization was provided by Egor Petrov.
  • Portuguese localization courtesy of Marco Sa.
  • The Spanish translation has been the work of Ezequiel Festa.
  • A. R. Eren provided the Turkish localization.
  • 李明杰Leneer helped with the Chinese (Simplified) translation.

I have learned that there used to be a similar project, which, as of this writing, appears to have died, though.

  • Device aggregation

    Device aggregation

    Using the button next to each entry, you can now selectively enable/disable each particular item in the device list. This way, you can also create multi-device-setups (“aggregate devices”). Multi-device-setups require that all the devices involved are running from the same clock source. You can achieve this by daisy-chaining devices via S/PDIF etc. On-board devices usually… more

  • Latency Compensation

    Latency Compensation

    Since ASIO4ALL does not have sufficient knowledge of the underlying hardware/driver architecture, it can only guess the actual latencies involved. With these sliders you can compensate for the latencies unknown to ASIO4ALL such that recordings in your sequencer Software are properly aligned with the rest. Note: In multi-device-setups the largest respective value of all devices… more

  • Hardware Buffer on/off

    Hardware Buffer on/off

    Note: For WaveRT drivers, this box is labeled “Allow Pull Mode (WaveRT)” instead! Enables the hardware buffer for the highlighted device. This only works for so called “WavePCI” miniports, as other types of WDM drivers do not usually allow direct access to the hardware buffer. Adjustment for best hardware buffer performance involves the “ASIO Buffer… more